Upper Limb Portable Motion Analysis System Based on Inertial Technology for Neurorehabilitation Purposes

Here an inertial sensor-based monitoring system for measuring and analyzing upper limb movements is presented. The final goal is the integration of this motion-tracking device within a portable rehabilitation system for brain injury patients. A set of four inertial sensors mounted on a special garment worn by the patient provides the quaternions representing the patient upper limb’s orientation in space. A kinematic model is built to estimate 3D upper limb motion for accurate therapeutic evaluation. The human upper limb is represented as a kinematic chain of rigid bodies with three joints and six degrees of freedom. Validation of the system has been performed by co-registration of movements with a commercial optoelectronic tracking system. Successful results are shown that exhibit a high correlation among signals provided by both devices and obtained at the Institut Guttmann Neurorehabilitation Hospital.

Inverse kinematics of a 6 DoF human upper limb using ANFIS and ANN for anticipatory actuation in ADL-based physical Neurorehabilitation

Objective: This research is focused in the creation and validation of a solution to the inverse kinematics problem for a 6 degrees of freedom human upper limb. This system is intended to work within a realtime dysfunctional motion prediction system that allows anticipatory actuation in physical Neurorehabilitation under the assisted-as-needed paradigm. For this purpose, a multilayer perceptron-based and an ANFIS-based solution to the inverse kinematics problem are evaluated. Materials and methods: Both the multilayer perceptron-based and the ANFIS-based inverse kinematics methods have been trained with three-dimensional Cartesian positions corresponding to the end-effector of healthy human upper limbs that execute two different activities of the daily life: "serving water from a jar" and "picking up a bottle". Validation of the proposed methodologies has been performed by a 10 fold cross-validation procedure. Results: Once trained, the systems are able to map 3D positions of the end-effector to the corresponding healthy biomechanical configurations. A high mean correlation coefficient and a low root mean squared error have been found for both the multilayer perceptron and ANFIS-based methods. Conclusions: The obtained results indicate that both systems effectively solve the inverse kinematics problem, but, due to its low computational load, crucial in real-time applications, along with its high performance, a multilayer perceptron-based solution, consisting in 3 input neurons, 1 hidden layer with 3 neurons and 6 output neurons has been considered the most appropriated for the target application.

Depth sensors-based upper limb motion capture system for functional neurorehabilitation

Versatile and accurate motion capture systems, with the required properties to be integrated within both clinical and domiciliary environments, would represent a significant advance in following the progress of the patients as well as in allowing the incorporation of new data exploitation and analysis methods to enhance the functional neurorehabilitation therapeutic processes. Besides, these systems would permit the later development of new applications focused on the automatization of the therapeutic tasks in order to increase the therapist/patient ratio, thus decreasing the costs [1]. However, current motion capture systems are not still ready to work within uncontrolled environments.

Dysfunctional profile for patients in physical neurorehabilitation of upper limb

This paper proposes a first approach to Objective Motor Assessment (OMA) methodology. Also, it introduces the Dysfunctional profile (DP) concept. DP consists of a data matrix characterizing the Upper Limb (UL) physical alterations of a patient with Acquired Brain Injury (ABI) during the rehabilitation process. This research is based on the comparison methology of UL movement between subjects with ABI and healthy subjects as part of OMA. The purpose of this comparison is to classify subjects according to their motor control and subsequently issue a functional assessment of the movement. For this purpose Artificial Neural Networks (ANN) have been used to classify patients. Different network structures are tested. The obtained classification accuracy was 95.65%. This result allows the use of ANNs as a viable option for dysfunctional assessment. This work can be considered a pilot study for further research to corroborate these results.

A data-globe and immersive virtual reality environment for upper limb rehabilitation after spinal cord injury

While a number of virtual data-gloves have been used in stroke, there is little evidence about their use in spinal cord injury (SCI). A pilot clinical experience with nine SCI subjects was performed comparing two groups: one carried out a virtual rehabilitation training based on the use of a data glove, CyberTouch combined with traditional rehabilitation, during 30 minutes a day twice a week along two weeks; while the other made only conventional rehabilitation. Furthermore, two functional indexes were developed in order to assess the patient’s performance of the sessions: normalized trajectory lengths and repeatability. While differences between groups were not statistically significant, the data-glove group seemed to obtain better results in the muscle balance and functional parameters, and in the dexterity, coordination and fine grip tests. Related to the indexes that we implemented, normalized trajectory lengths and repeatability, every patient showed an improvement in at least one of the indexes, either along Y-axis trajectory or Z-axis trajectory. This study might be a step in investigating new ways of treatments and objective measures in order to obtain more accurate data about the patient’s evolution, allowing the clinicians to develop rehabilitation treatments, adapted to the abilities and needs of the patients.

Objective metrics for functional evaluation of upper limb during the ADL of drinking: application in SCI

Three-dimensional kinematic analysis provides quantitative assessment of upper limb motion and is used as an outcome measure to evaluate movement disorders. The aim of the present study is to present a set of kinematic metrics for quantifying characteristics of movement performance and the functional status of the subject during the execution of the activity of daily living (ADL) of drinking from a glass. Then, the objective is to apply these metrics in healthy people and a population with cervical spinal cord injury (SCI), and to analyze the metrics ability to discriminate between healthy and pathologic people. 19 people participated in the study: 7 subjects with metameric level C6 tetraplegia, 4 subjects with metameric level C7 tetraplegia and 8 healthy subjects. The movement was recorded with a photogrammetry system. The ADL of drinking was divided into a series of clearly identifiable phases to facilitate analysis. Metrics describing the time of the reaching phase, the range of motion of the joints analyzed, and characteristics of movement performance such as the efficiency, accuracy and smoothness of the distal segment and inter-joint coordination were obtained. The performance of the drinking task was more variable in people with SCI compared to the control group in relation to the metrics measured. Reaching time was longer in SCI groups. The proposed metrics showed capability to discriminate between healthy and pathologic people. Relative deficits in efficiency were larger in SCI people than in controls. These metrics can provide useful information in a clinical setting about the quality of the movement performed by healthy and SCI people during functional activities.

A novel motion tracking system for evaluation of functional rehabilitation of the upper limbs

Upper limb function impairment is one of the most common sequelae of central nervous system injury, especially in stroke patients and when spinal cord injury produces tetraplegia. Conventional assessment methods cannot provide objective evaluation of patient performance and the tiveness of therapies. The most common assessment tools are based on rating scales, which are inefficient when measuring small changes and can yield subjective bias. In this study, we designed an inertial sensor-based monitoring system composed of five sensors to measure and analyze the complex movements of the upper limbs, which are common in activities of daily living. We developed a kinematic model with nine degrees of freedom to analyze upper limb and head movements in three dimensions. This system was then validated using a commercial optoelectronic system. These findings suggest that an inertial sensor-based motion tracking system can be used in patients who have upper limb impairment through data integration with a virtual reality-based neuroretation system.

Modeling and Simulation of Upper Brachial Plexus Injury

This article presents the first musculoskeletal model and simulation of upper plexus brachial injury. From this model is possible to analyse forces and movement ranges in order to develop a robotic exoskeleton to improve rehabilitation. The software that currently exists for musculoskeletal modeling is varied and most have advanced features for proper analysis and study of motion simulations. Whilst more powerful computer packages are usually expensive, there are other free and open source packages available which offer different tools to perform animations and simulations and which obtain forces and moments of inertia. Among them, Musculoskeletal Modeling Software was selected to construct a model of the upper limb, which has 7 degrees of freedom and 10 muscles. These muscles are important for two of the movements simulated in this article that are part of the post-surgery rehabilitation protocol. We performed different movement animations which are made using the inertial measurement unit to capture real data from movements made by a human being. We also performed the simulation of forces produced in elbow flexion-extension and arm abduction-adduction of a healthy subject and one with upper brachial plexus injury in a postoperative state to compare the force that is capable of being produced in both cases.

Metodologías de modelado, monitorización y asistencia robótica en neurorrehabilitación funcional de extremidad superior

La Organización Mundial de la Salud (OMS) prevé que para el año 2020, el Daño Cerebral Adquirido (DCA) estará entre las 10 causas más comunes de discapacidad. Estas lesiones, dadas sus consecuencias físicas, sensoriales, cognitivas, emocionales y socioeconómicas, cambian dramáticamente la vida de los pacientes y sus familias. Las nuevas técnicas de intervención precoz y el desarrollo de la medicina intensiva en la atención al DCA han mejorado notablemente la probabilidad de supervivencia. Sin embargo, hoy por hoy, las lesiones cerebrales no tienen ningún tratamiento quirúrgico que tenga por objetivo restablecer la funcionalidad perdida, sino que las terapias rehabilitadoras se dirigen hacia la compensación de los déficits producidos. Uno de los objetivos principales de la neurorrehabilitación es, por tanto, dotar al paciente de la capacidad necesaria para ejecutar las Actividades de Vida Diaria (AVDs) necesarias para desarrollar una vida independiente, siendo fundamentales aquellas en las que la Extremidad Superior (ES) está directamente implicada, dada su gran importancia a la hora de la manipulación de objetos. Con la incorporación de nuevas soluciones tecnológicas al proceso de neurorrehabilitación se pretende alcanzar un nuevo paradigma centrado en ofrecer una práctica personalizada, monitorizada y ubicua con una valoración continua de la eficacia y de la eficiencia de los procedimientos y con capacidad de generar conocimientos que impulsen la ruptura del paradigma de actual. Los nuevos objetivos consistirán en minimizar el impacto de las enfermedades que afectan a la capacidad funcional de las personas, disminuir el tiempo de incapacidad y permitir una gestión más eficiente de los recursos. Estos objetivos clínicos, de gran impacto socio-económico, sólo pueden alcanzarse desde una apuesta decidida en nuevas tecnologías, metodologías y algoritmos capaces de ocasionar la ruptura tecnológica necesaria que permita superar las barreras que hasta el momento han impedido la penetración tecnológica en el campo de la rehabilitación de manera universal. De esta forma, los trabajos y resultados alcanzados en la Tesis son los siguientes: 1. Modelado de AVDs: como paso previo a la incorporación de ayudas tecnológicas al proceso rehabilitador, se hace necesaria una primera fase de modelado y formalización del conocimiento asociado a la ejecución de las actividades que se realizan como parte de la terapia. En particular, las tareas más complejas y a su vez con mayor repercusión terapéutica son las AVDs, cuya formalización permitirá disponer de modelos de movimiento sanos que actuarán de referencia para futuros desarrollos tecnológicos dirigidos a personas con DCA. Siguiendo una metodología basada en diagramas de estados UML se han modelado las AVDs 'servir agua de una jarra' y 'coger un botella' 2. Monitorización ubícua del movimiento de la ES: se ha diseñado, desarrollado y validado un sistema de adquisición de movimiento basado en tecnología inercial que mejora las limitaciones de los dispositivos comerciales actuales (coste muy elevado e incapacidad para trabajar en entornos no controlados); los altos coeficientes de correlación y los bajos niveles de error obtenidos en los corregistros llevados a cabo con el sistema comercial BTS SMART-D demuestran la alta precisión del sistema. También se ha realizado un trabajo de investigación exploratorio de un sistema de captura de movimiento de coste muy reducido basado en visión estereoscópica, habiéndose detectado los puntos clave donde se hace necesario incidir desde un punto de vista tecnológico para su incorporación en un entorno real 3. Resolución del Problema Cinemático Inverso (PCI): se ha diseñado, desarrollado y validado una solución al PCI cuando el manipulador se corresponde con una ES humana estudiándose 2 posibles alternativas, una basada en la utilización de un Perceptrón Multicapa (PMC) y otra basada en sistemas Artificial Neuro-Fuzzy Inference Systems (ANFIS). La validación, llevada a cabo utilizando información relativa a los modelos disponibles de AVDs, indica que una solución basada en un PMC con 3 neuronas en la capa de entrada, una capa oculta también de 3 neuronas y una capa de salida con tantas neuronas como Grados de Libertad (GdLs) tenga el modelo de la ES, proporciona resultados, tanto de precisión como de tiempo de cálculo, que la hacen idónea para trabajar en sistemas con requisitos de tiempo real 4. Control inteligente assisted-as-needed: se ha diseñado, desarrollado y validado un algoritmo de control assisted-as-needed para una ortesis robótica con capacidades de actuación anticipatoria de la que existe un prototipo implementado en la actualidad. Los resultados obtenidos demuestran cómo el sistema es capaz de adaptarse al perfil disfuncional del paciente activando la ayuda en instantes anteriores a la ocurrencia de movimientos incorrectos. Esta estrategia implica un aumento en la participación del paciente y, por tanto, en su actividad muscular, fomentándose los procesos la plasticidad cerebral responsables del reaprendizaje o readaptación motora 5. Simuladores robóticos para planificación: se propone la utilización de un simulador robótico assisted-as-needed como herramienta de planificación de sesiones de rehabilitación personalizadas y con un objetivo clínico marcado en las que interviene una ortesis robotizada. Los resultados obtenidos evidencian como, tras la ejecución de ciertos algoritmos sencillos, es posible seleccionar automáticamente una configuración para el algoritmo de control assisted-as-needed que consigue que la ortesis se adapte a los criterios establecidos desde un punto de vista clínico en función del paciente estudiado. Estos resultados invitan a profundizar en el desarrollo de algoritmos más avanzados de selección de parámetros a partir de baterías de simulaciones Estos trabajos han servido para corroborar las hipótesis de investigación planteadas al inicio de la misma, permitiendo, asimismo, la apertura de nuevas líneas de investigación. Summary The World Health Organization (WHO) predicts that by the year 2020, Acquired Brain Injury (ABI) will be among the ten most common ailments. These injuries dramatically change the life of the patients and their families due to their physical, sensory, cognitive, emotional and socio-economic consequences. New techniques of early intervention and the development of intensive ABI care have noticeably improved the survival rate. However, in spite of these advances, brain injuries still have no surgical or pharmacological treatment to re-establish the lost functions. Neurorehabilitation therapies address this problem by restoring, minimizing or compensating the functional alterations in a person disabled because of a nervous system injury. One of the main objectives of Neurorehabilitation is to provide patients with the capacity to perform specific Activities of the Daily Life (ADL) required for an independent life, especially those in which the Upper Limb (UL) is directly involved due to its great importance in manipulating objects within the patients' environment. The incorporation of new technological aids to the neurorehabilitation process tries to reach a new paradigm focused on offering a personalized, monitored and ubiquitous practise with continuous assessment of both the efficacy and the efficiency of the procedures and with the capacity of generating new knowledge. New targets will be to minimize the impact of the sicknesses affecting the functional capabilitiies of the subjects, to decrease the time of the physical handicap and to allow a more efficient resources handling. These targets, of a great socio-economic impact, can only be achieved by means of new technologies and algorithms able to provoke the technological break needed to beat the barriers that are stopping the universal penetration of the technology in the field of rehabilitation. In this way, this PhD Thesis has achieved the following results: 1. ADL Modeling: as a previous step to the incorporation of technological aids to the neurorehabilitation process, it is necessary a first modelling and formalization phase of the knowledge associated to the execution of the activities that are performed as a part of the therapy. In particular, the most complex and therapeutically relevant tasks are the ADLs, whose formalization will produce healthy motion models to be used as a reference for future technological developments. Following a methodology based on UML state-chart diagrams, the ADLs 'serving water from a jar' and 'picking up a bottle' have been modelled 2. Ubiquitous monitoring of the UL movement: it has been designed, developed and validated a motion acquisition system based on inertial technology that improves the limitations of the current devices (high monetary cost and inability of working within uncontrolled environments); the high correlation coefficients and the low error levels obtained throughout several co-registration sessions with the commercial sys- tem BTS SMART-D show the high precision of the system. Besides an exploration of a very low cost stereoscopic vision-based motion capture system has been carried out and the key points where it is necessary to insist from a technological point of view have been detected 3. Inverse Kinematics (IK) problem solving: a solution to the IK problem has been proposed for a manipulator that corresponds to a human UL. This solution has been faced by means of two different alternatives, one based on a Mulilayer Perceptron (MLP) and another based on Artificial Neuro-Fuzzy Inference Systems (ANFIS). The validation of these solutions, carried out using the information regarding the previously generated motion models, indicate that a MLP-based solution, with an architecture consisting in 3 neurons in the input layer, one hidden layer of 3 neurons and an output layer with as many neurons as the number of Degrees of Freedom (DoFs) that the UL model has, is the one that provides the best results both in terms of precission and in terms of processing time, making in idoneous to be integrated within a system with real time restrictions 4. Assisted-as-needed intelligent control: an assisted-as-needed control algorithm with anticipatory actuation capabilities has been designed, developed and validated for a robotic orthosis of which there is an already implemented prototype. Obtained results demonstrate that the control system is able to adapt to the dysfunctional profile of the patient by triggering the assistance right before an incorrect movement is going to take place. This strategy implies an increase in the participation of the patients and in his or her muscle activity, encouraging the neural plasticity processes in charge of the motor learning 5. Planification with a robotic simulator: in this work a robotic simulator is proposed as a planification tool for personalized rehabilitation sessions under a certain clinical criterium. Obtained results indicate that, after the execution of simple parameter selection algorithms, it is possible to automatically choose a specific configuration that makes the assisted-as-needed control algorithm to adapt both to the clinical criteria and to the patient. These results invite researchers to work in the development of more complex parameter selection algorithms departing from simulation batteries Obtained results have been useful to corroborate the hypotheses set out at the beginning of this PhD Thesis. Besides, they have allowed the creation of new research lines in all the studied application fields.

Definición e implementación de métricas objetivas para la evaluación funcional del miembro superior: aplicación a población con lesión medular cervical

En personas que padecen una Lesión Medular cervical, la función de los miembros superiores se ve afectada en mayor o menor medida, dependiendo fundamentalmente del nivel de la lesión y de la severidad de la misma. El déficit en la función del miembro superior hace que la autonomía e independencia de las personas se vea reducida en la ejecución de Actividades de la Vida Diaria. En el entorno clínico, la valoración de la función del miembro superior se realiza principalmente con escalas clínicas. Algunas de ellas valoran el nivel de dependencia o independencia en la ejecución de Actividades de la Vida Diaria, como, por ejemplo, el índice de Barthel y la escala FIM (Medida de la Independencia Funcional). Otras escalas, como Jebsen-Taylor Hand Function, miden la función del miembro superior valorando la destreza y la habilidad en la ejecución de determinadas tareas funcionales. Estas escalas son generales, es decir, se pueden aplicar a distintas poblaciones de sujetos y a la presencia de distintas patologías. Sin embargo, existen otras escalas desarrolladas específicamente para valorar una patología concreta, con el objetivo de hacer las evaluaciones funcionales más sensibles a cambios. Un ejemplo es la escala Spinal Cord Independence Measure (SCIM), desarrollada para valorar Lesión Medular. Las escalas clínicas son instrumentos de medida estandarizados, válidos para su uso en el entorno clínico porque se han validado en muestras grandes de pacientes. No obstante, suelen poseer una elevada componente de subjetividad que depende principalmente de la persona que puntúa el test. Otro aspecto a tener en cuenta, es que la sensibilidad de las escalas es alta, fundamentalmente, a cambios groseros en el estado de salud o en la función del miembro superior, de forma que cambios sutiles en el sujeto pueden no ser detectados. Además, en ocasiones, poseen saturaciones en el sistema de puntuación, de forma que mejorías que se puedan producir por encima de un determinado umbral no son detectadas. En definitiva, estas limitaciones hacen que las escalas clínicas no sean suficientes, por sí mismas, para evaluar estrategias motoras del miembro superior durante la ejecución de movimientos funcionales, siendo necesaria la búsqueda de instrumentos de medida que aporten objetividad, complementen las valoraciones y, al mismo tiempo, intenten solventar las limitaciones que poseen las escalas. Los estudios biomecánicos son ejemplos de métodos objetivos, en los que diversas tecnologías se pueden utilizar para recoger información de los sujetos. Una concreción de estos estudios son los estudios cinemáticos. Mediante tecnología optoelectrónica, inercial o electromagnética, estos estudios proporcionan información objetiva acerca del movimiento realizado por los sujetos, durante la ejecución de tareas concretas. Estos sistemas de medida proporcionan grandes cantidades de datos que carecen de una interpretación inmediata. Estos datos necesariamente deben ser tratados y reducidos a un conjunto de variables que, a priori, posean una interpretación más sencilla para ser utilizados en la práctica clínica. Estas han sido las principales motivaciones de esta investigación. El objetivo principal fue proponer un conjunto de índices cinemáticos que, de forma objetiva, valoren la función del miembro superior; y validar los índices propuestos en poblaciones con Lesión Medular, para su uso como instrumentos de valoración en el entorno clínico. Esta tesis se enmarca dentro de un proyecto de investigación: HYPER (Hybrid Neuroprosthetic and Neurorobotic Devices for Functional Compensation and Rehabilitation of Motor Disorders, referencia CSD2009-00067 CONSOLIDER INGENIO 2010). Dentro de este proyecto se lleva a cabo investigación en el desarrollo de modelos, para determinar los requisitos biomecánicos y los patrones de movimiento de los miembros superiores en sujetos sanos y personas con lesión medular. Además, se realiza investigación en la propuesta de nuevos instrumentos de evaluación funcional en el campo de la rehabilitación de los miembros superiores. ABSTRACT In people who have suffered a cervical Spinal Cord Injury, upper limbs function is affected to a greater or lesser extent, depending primarily on the level of the injury and the severity of it. The deficit in the upper limb function reduces the autonomy and independence of persons in the execution of Activities of Daily Living. In the clinical setting, assessment of upper limb function is mainly performed based on clinical scales. Some value the level of dependence or independence in performing activities of daily living, such as the Barthel Index and the FIM scale (Functional Independence Measure). Other scales, such as the Jebsen-Taylor Hand Function, measure upper limb function in terms of the skill and ability to perform specific functional tasks. These scales are general, so can be applied to different populations of subjects and the presence of different pathologies. However, there are other scales developed for a specific injury, in order to make the functional assessments more sensitive to changes. An example is the Spinal Cord Independence Measure (SCIM), developed for people with Spinal Cord Injury. The clinical scales are standardized instruments measure, valid for use in the clinical setting because they have been validated in large patient samples. However, they usually have a high level of subjectivity which mainly depends on the person who scores the test. Another aspect to take into account is the high sensitivity of the scales mainly to gross changes in the health status or upper limb function, so that subtle changes in the subject may not be detected. Moreover, sometimes, have saturations in the scoring system, so that improvements which may occur above a certain threshold are not detected. For these reasons, clinical scales are not enough, by themselves, to assess motor strategies used during movements. So, it’s necessary to find measure instruments that provide objectivity, supplement the assessments and, at the same time, solving the limitations that scales have. Biomechanical studies are examples of objective methods, in which several technologies can be used to collect information from the subjects. One kind of these studies is the kinematic movement analysis. By means of optoelectronics, inertial and electromagnetic technology, these studies provide objective information about the movement performed by the subjects during the execution of specific tasks. These systems provide large quantities of data without easy and intuitive interpretation. These data must necessarily be treated and reduced to a set of variables that, a priori, having a simpler interpretation for their use in the clinical practice. These were the main motivations of this research. The main objective was to propose a set of kinematic indices, or metrics that, objectively, assess the upper limb function and validate the proposed rates in populations with Spinal Cord Injury, for use as assessment tools in the clinical setting. This dissertation is framed within a research project: HYPER (Neurorobotic Devices for Functional Compensation and Rehabilitation of Motor Disorders, grant CSD2009- 00067 CONSOLIDER INGENIO 2010). Within this research project, research is conducted in relation to the biomechanical models development for determining the biomechanical requirements and movement patterns of the upper limb in healthy and people with Spinal Cord Injury. Moreover, research is conducted with respect to the proposed of new functional assessment instruments in the field of upper limb rehabilitation.

Regulación del movimiento y anticipación en el resto del primer servicio en tenis

Aunque se han logrado importantes avances en estudios de laboratorio con diseños experimentales poco representativos (e.g., Farrow y Reid, 2012; Nieminen, Piirainen, Salmi, y Linnamo, 2013), a día de hoy, todavía se desconoce a cabalidad cómo los jugadores de tenis de diferente nivel de pericia calibran o ajustan sus movimientos a las demandas espacio-temporales presentes en la tarea de resto de un primer servicio. ! Escasos trabajos se han llevado a cabo in situ y a la mayoría se les puede cuestionar algún aspecto de la metodología empleada. Así pues, en varios estudios la frecuencia de grabación ha sido limitada (e.g., a 50 Hz en Jackson y Gudgeon, 2004; Triolet, Benguigui, Le Runigo y Williams, 2013), o la velocidad del saque ha sido visiblemente inferior a la habitual (cf. Carboch, Süss y Kocib, 2014; Williams, Singer y Weigelt, 1998). También, en algunos estudios los participantes experimentados no han sido jugadores de nivel internacional (e.g., Avilés, Ruiz, Sanz y Navia, 2014), y el tamaño muestral ha sido muy pequeño (e.g., Gillet, Leroy, Thouvarecq, Mégrot y Stein, 2010). ! Además, en los diferentes trabajos se han utilizado una diversidad de métodos e instrumentos de medida y los criterios de codificación del inicio de los movimientos y de las respuestas han diferido; como consecuencia el lapso visomotor de respuesta (LVMr) ha sido muy dispar variando considerablemente de 198 a 410 ms. Considerando los inconvenientes señalados anteriormente, el presente estudio tuvo como objetivo determinar un modelo técnico de regulación temporal de los movimientos y de la respuesta del restador, tomando en cuenta el flujo continuo de información proporcionado por el sacador. Para ello, se realizó un análisis cronométrico de los restos de doce jugadores de diferente nivel deportivo (seis internacionales y seis nacionales) que respondieron de forma natural enviando sus devoluciones hacia las dianas. Se grabaron las acciones de los restadores y sacadores con una cámara Casio Exilim Pro Ex-F1 de alta velocidad (300 Hz) y luego se realizó un análisis imagen por imagen cada 3.33 ms. Una vez obtenidos los datos de los vídeos se realizaron análisis con las pruebas de ANOVA de un factor, ANCOVA con la velocidad del saque como covariable, U de Mann-Whitney y Chi-cuadrado de Pearson. En cuanto a la regulación del movimiento hasta el momento del despegue, los jugadores internacionales iniciaron sus acciones antes que los jugadores nacionales lo que podría indicar una mejor preparación al ejecutar los movimientos como reflejo del nivel de pericia. Los jugadores internacionales iniciaron la elevación del pie posterior a -293 ms y los jugadores nacionales a -202 ms. Todas estas acciones se fueron enlazando unas con otras y fue en el momento del impacto del sacador donde los restadores demostraron una remarcable coordinación perceptivo-motriz. Por consiguiente, los jugadores internacionales despegaron e iniciaron el vuelo a tan solo -6.5 ms del impacto y los jugadores nacionales lo hicieron más tarde a +19.5 ms. A lo largo de la secuencia temporal, todo parece indicar que las informaciones que utilizan los restadores interactúan entre sí; información más temprana y menos fiable para anticipar o moverse antes e información más tardía y más fiable para regular la temporalización de las acciones. Los restadores de nivel internacional y nacional anticiparon a nivel espacial en un bajo porcentaje (7.7% vs. 13.6%) y en tiempos similares (-127 vs. -118 ms) sugiriendo que la utilización de variables ópticas tempranas y menos fiables solo se produce en contadas ocasiones. Por otra parte, estos datos se relacionan con una gran precisión en la respuesta ya que tanto los jugadores internacionales como los nacionales demostraron un alto porcentaje de acierto al responder (95.4% vs. 96.7%). Se había señalado que los jugadores internacionales y nacionales se diferenciarían en el tiempo de caída (i.e., aterrizaje) del primer pie del salto preparatorio, sin embargo ese efecto no fue encontrado (128 vs. 135 ms). Tampoco se hallaron diferencias en el porcentaje de caída con el pie contrario a la dirección de la pelota (58% vs. 62%). Donde sí ambos grupos se diferenciaron fue en el tiempo de caída del segundo pie (147 vs. 168 ms). Esta diferencia de 21 ms fue crucial y fue una prueba de la mayor rapidez de los jugadores internacionales; sugiriendo que ésta acción se podría relacionar con el momento del inicio de la respuesta. Aunque los jugadores internacionales hayan demostrado ser más rápidos en relación con sus capacidades funcionales, ambos grupos no se diferenciaron en todas las variables relacionadas con el LVMr. Ellos no utilizaron esos valiosos milisegundos ganados en el instante de la caída del segundo pie para responder más pronto, ya que el LVMr del miembro superior fue el mismo para ambos grupos (179 vs. 174 ms). Es como si hubiesen tenido todo el tiempo del mundo para seguir ajustando sus acciones hasta el propio golpeo. Además, estos tiempos largos sugieren que en la gran mayoría de los restos la información clave que determinó la respuesta fue detectada (extraída) en momentos cercanos al golpeo del sacador y en la primera parte del vuelo de la pelota. Asimismo, se constató que en general el LVMr se ve influenciado por el tipo de información utilizada. De esta manera, cuando se tomaron en cuenta los ensayos en los que hubo anticipación espacial reflejados en el LVMr del cuerpo entero los tiempos disminuyeron (152 vs. 136 ms). Por otra parte, existieron ocasiones (13%) en los que tanto los jugadores internacionales como los nacionales respondieron tarde recibiendo saques directos (208 vs. 195 ms). Es muy posible que en estos casos los jugadores hayan tenido problemas para detectar la información respondiendo fuera de los márgenes temporales de acción lo que mermó su rendimiento. Lo mismo pudo haber ocurrido cuando ambos grupos de jugadores corrigieron el movimiento del miembro superior tras el impacto (17% vs. 10%) lo que aumentó el tiempo en responder al redirigir la respuesta hacia el lado correcto (208 vs. 205 ms). Además, los jugadores internacionales obtuvieron tiempos de movimiento menores que el de los jugadores nacionales (509 vs. 531 ms) lo que se reflejó en un tiempo total de actuación menor (683 vs. 703 ms). Por último, en cuanto al rendimiento del resto, los jugadores internacionales obtuvieron valores superiores a los jugadores nacionales (1.3 vs. 0.9). ABSTRACT Although there have been significant advances in laboratory studies with unrepresentative experimental designs (e.g., Farrow y Reid, 2012; Nieminen, Piirainen, Salmi, y Linnamo, 2013), today it is still unknown to full extent how tennis players of different levels of expertise calibrate or adjust their movements to the spatial-temporal demands present in the return of a first serve. Few studies have been carried out in situ and some aspects of the methodology most of them used can be questioned. Thus, in several studies the recording frequency has been limited (e.g., a 50 Hz en Jackson y Gudgeon, 2004; Triolet, Benguigui, Le Runigo y Williams, 2013), or serve speed was visibly lower than the usual one (cf. Carboch, Süss y Kocib, 2014; Williams, Singer y Weigelt, 1998). Also, in some studies, experienced participants have not played at international level (e.g., Avilés, Ruiz, Sanz y Navia, 2014), and the sample size has been very small (e.g., Gillet, Leroy, Thouvarecq, Mégrot y Stein, 2010). Furthermore, different works have used a variety of methods and measurement instruments and coding criteria of the onset of movements and responses have differed; due to this, visuomotor response delay (LVMr) has been very uneven, varying considerably from 198-410 ms. Considering the drawbacks mentioned above, this study aimed to determine a technical model of temporal regulation of movements and returner’s response, taking into account the continuous flow of information provided by the server. For this, a chronometric analysis of the returns of twelve players (six international and six national) of different sports level, that naturally responded by hitting their returns towards the targets, was performed. Actions of servers and returners were recorded with a Casio Exilim Pro Ex-F1 high speed camera (300 Hz) and then every 3.33 ms analysis was made frame by frame. Once the data of the videos were obtained, analyses were performed using one factor ANOVA test, ANCOVA with the speed of the serve as a covariate, U of Mann- Whitney and Pearson’s Chi-square test. As for the regulation of movement until the moment of serve, international players began their actions before national players, which could indicate that they were better prepared to execute movements reflecting the level of their expertise. International players began raising the rear foot at -293 ms and national players at -202 ms. All these actions were being linked to each other and it was at the moment of impact of the server when the receivers demonstrated a remarkable perceptual-motor coordination. Therefore, international players took off and started their flight just -6.5 ms before the serve and national players did the same somewhat later: +19.5 ms after the serve. Along the timeline, everything seems to indicate that the information used by returners interact with each other; early information which is less reliable to anticipate or move before, and later information more reliable appears to regulate the timing of actions. Returners of international and national levels anticipated at spatial level in a low percentage (7.7% vs. 13.6%) and in similar times (-127 vs. -118 ms) suggesting that the use of early and less reliable optical variables is only produced on rare occasions. Moreover, these data relate to a precise response as both international and national players showed a high percentage of success in responding (95.4% vs. 96.7%). It had been noted that international and national players would differ in the time the fall (i.e., landing) of the first foot of the split-step, however, this effect was not found (128 vs. 135 ms). No differences in the percentage of fall with the opposite foot to the direction of the ball (58% vs. 62%) were found. Where the two groups differed was in the time of the fall of the second foot (147 vs. 168 ms). This difference of 21 ms was crucial and it was a proof of mayor speed of international players; suggesting that this action could be related to the onset time of response. Although international players have proven to be faster in relation to their functional capabilities, both groups did not differ in all variables related to LVMr. They did not use those precious milliseconds earned at the time of the fall of the second foot to respond as soon, since the LVMr of the upper limb was the same for both groups (179 vs. 174 ms). It is as if they had all the time in the world to continue to adjust their actions until the return itself. Furthermore, these long times suggest that in the vast majority of the returns, key information that determined the response was detected (pick-up) in moments close to the hit of the server and in the first part of the ball flight. It was also found that in general the LVMr is influenced by the type of information used. Thus, when taking into account the trials during which there was spatial anticipation, reflected in LVMr of the whole body, the times decreased (152 vs. 136 ms). On the other hand, there were occasions (13%) where both international and national players responded late, thus receiving aces (208 vs. 195 ms). It is quite possible that in these cases the players have had trouble to pick-up information, responding out of temporary margins of action, which affected their performance. The same could have occurred when both groups of players corrected upper limb movement after impact (17% vs. 10%), which increased the time to respond and to redirect the return towards the right side (208 vs. 205 ms). Moreover, international players scored lower movement times than the national players (509 vs. 531 ms), which was reflected in a shorter total response time (683 vs. 703 ms). Finally, as far as the performance of return is concerned, international players scored above the national players values (1.3 vs. 0.9).